Pool Shock Treatment


A pool without treatment for a long time can turn green due to algae infestation, in this case,  it is necessary to provide a special treatment called shock. This treatment is also necessary when the pool is contaminated with feces or dead animals.

The Pool Shock Treatment is characterized by the addition of chlorine in the pool above the regular amount. Normally we add 14 grams of granular chlorine for every 1000 liters of water in the pool.


The shock treatment in the pool is used when there is a very serious problem in the pool and only the excess chlorine can solve, such as:

Heavy rains;

Water contamination by dead animals or feces;

 Excess organic material in water;

A large number of swimmers attending the pool daily;

Green water and signs of algae growth;

Complaints of burning eyes or strong chlorine odor;

Unpleasant odor in the pool;

Shock treatment in the swimming pool

Check and adjust the levels of alkalinity (80-120 ppm) and pH (7.0 to 7.4).  Add 14 g of chlorine granules per cubic meter of water.


After the addition of extra chlorine, all the dirt from the water would fall to the bottom of the pool.  Now we will be able to vacuum the bottom.

pool shok treatment

Eagle Pools Services is prepared and qualified to undertake the treatment of your pool keeping it always clean and clear!

Call us today for a free estimate (561) 665-7333

How to remove the stains from your pool

The problem with stains can happen in masonry pools (insert, tile, porcelain tile) and also in vinyl pools. 

It is interesting, first of all, check the type of stain that comes in your pool. Should identify what kind of stain is it in the pool vinyl pools, there is a certain manufacturing defects that encourages the growth of a species of fungus that eventually stain the walls and the bottom of the pool.

The vinyl pool usually has several years of warranty against manufacturing defects and these spots caused by fungi, are considered a manufacturing defect.

 There are several factors that can cause stains in the pool:

– Development of algae

– Metals used in water supplies

– Cracks allowing penetration of dirt and organic matter at the base of the coating

pool cleaning service boca raton


How to remove a stain from your swimming pool

Leave a trichlor tablet in contact with the stained surface;

Leave the tablet until the stain is gone completely, remembering to scrub daily local stained 

During this period the pool should not be used if the chlorine content exceeding 3 ppm , and to use it, the tablets should be removed and stored in a plastic bucket with pool water.


Stains on fiber and vinyl pool 

Stains on vinyl pools or fiber can be removed by lowering the pH to below pH 6.8 using reducer. Lowering the pH becomes acidic water and softens stains making them easy to remove. 

The treatment may have the duration of one week, during this period the pool will be closed, and brushing of spots on the surface of the pool should be performed with a brush. Do not use abrasive materials. 

After removing stain, vacuum the bottom of the pool with the filter in the drain position. Adjust the parameters of alkalinity and pH, keep the chlorine content of between 1 and 3 ppm.


How a Acid Washing is done

Has your pool turned dark green? This might occur if the winterizing method isn’t done properly, or if the pool has been stagnant for a certain time. If you notice creatures splashing around, it’s most likely time to empty and clean your swimming pool.

When we should acid wash your pool:

If you’ll see all-time low of the pool (the floor) then you’ll bring it back chemically, labor and filtering. If the ground isn’t visible, the value of the chemicals and labor can typically be larger than the acid wash charge. 

acid washing
acid washing

An acid wash is a denudation of a small layer of plaster, exposing recent plaster. Most plaster coats (sometimes referred to as white coat or marcite) are in far more than 1/2″, therefore a number of careful acid washes won’t hurt.

You may elect an acid wash not thanks to swamp conditions, however simply to bring out a brighter, whiter end. Mineral stains and/or deposits, chemical element stains, even dirt stains…an acid wash is usually a dramatic aesthetic improvement.

If your pool has had years of protoctist blooms, and if your pool looks to grow protoctist long, changing the water and acid washing may be a dangerous substance. Our professionals are specially trained in its application and wear protecting article of clothing and breathing device throughout the acid wash. to guard our surroundings, the acid/water waste ought to be neutralised with sal soda before its being pumped up to a secure location.

If you choose to empty and clean your own pool, make certain that the hydrostatic relief plugs are force as shortly as attainable, which the water is pumped up to a foreign location, or into a storm drain. you’ll conjointly got to seek advice from native water authorities for waste water discharge rules.

As you drain the pool, wash it down (scrub if necessary) to get rid of all protoctist and leaves. Bag up all leaves and scrap within the pool’s bottom. Once the pool is clean and empty, you’ll begin to acid washing the plaster. Wearing special clothes, rubber boots, and a respiratory mask designed for acid fumes are essential to keep your body safe.

Add one gallon acid to one gallon water in an exceedingly flower watering pot (always add acid to water, not the opposite). Wet down the wall with a hose. Keep the hose(s) running in any respective times, while not a nozzle on that. Pour the acid/water mixture down the wall, from the top to the to bottom, one ten foot section at a time. Don’t enable the acid to take a seat on the plaster for terribly long, sometimes thirty seconds is long enough. Use an acid brush to wash the surfaces and move the acid around. Rinse quickly and completely.

Make sure acid is rinsed utterly, because it can still print the plaster. 

After the acid wash, all-time low of the pool are crammed with a foamy, acid puddle. This must be neutralised before pumping out. Use two lbs of sal soda per one gallon of acid used. Broadcast the ash over the puddle whereas stirring with a pool surface a pole. Use a little submersible pump with a hose to pump out the remaining acid water. watch out wherever you pump it to. albeit properly neutralised, it’s going to destroy plants or kill fish, frogs, etc. Rinse the bowl once more, and re-pour the bowl of the deep finish to wash up well round the drain, being careful to not burn the plaster an excessive amount of.

Don’t rush the work and be safe. The fumes may be terribly robust, and extremely dangerous. make certain to wear a respirator that may block hydrochloric acid fumes, spectacles or safety glasses and protecting article of clothing. Wear previous shoes, or rubber boots. Spray off before exiting the pool. Transporting the acid from the shop to the house may be venturous conjointly. Secure the load within the vehicle. invariably have a person near once acid laundry the pool. If acid drops enter the mouth or eye, rinse with the hose for fifteen minutes, while not a nozzle on that. Acid on the skin will not sometimes burn an excessive amount of, simply rinse quickly, for thirty seconds.

It is suggested that you simply pay a service company to perform this for you. Eagle Pools Services has professionals trained to executed a perfect acid washing in your pool, bringing amazing results to your pool.

Contact Us

Send us your enquiry and we will get you the best deal.

  • "By clicking the 'Submit' button, you agree to receive our latest news, updates, and special offers via email. You can unsubscribe at any time."